Enter/Manage Feed Mixers
- From the main menu, select “Manage” and then select “Mixers”.
- Press "+" to create a new Mixer.
-
Mixer name:
- Enter the mixer name name. This will be displayed if you use the TST7600 feed management display or FEED app.
-
Display model:
- Select the display model on your feed mixer from the drop-down menu.
-
Status:
- Select, from the status drop down menu, if a mixer is:
- Active (mixer can receive loads)
- Verify (check mixer before receiving loads)
- In service (mixer cannot receive loads)
- Not inuse (mixer cannot be selected in the "load mixer"screen)
- Select, from the status drop down menu, if a mixer is:
-
Display Name:
- Enter a, max six character long, abbreviation of the mixer name. The "Display Name" field will only show if you select 361, 3610, 4610 or 7600 for display type.
-
Show legacy devices:
- If you check this box, you will also see the older display models in the drop down menu (2)
- Selecting any of the legacy devices will also activate the "Display Name" field.
-
Load size:
- Enter the capacity of your mixer in cubic meter or feet.
-
Scale number:
- Enter the scale number in case of wireless communication. The scale number in TAP FEED should be the same as setup in the display
-
Communication settings:
- Depending on the display model selected (2), the communication settings supported by the display model can be setup here
-
Save Mixer
- Save the mixer. The mixer will be added to the window on the left
Activate data transfer option:
- Depending on the display type you have selected, you will be instructed to install the "TAP FEED agent" or mobile app.
Install TAP FEED agent:
- The TAP FEED AGENT is required in order to send loads and upload results using TAP Feed with USB and wireless communication.
- Select the mixer you want to setup
- If the display on this mixer uses USB, the " DOWNLOAD TAP FEED AGENT" button will show. Click to download the "Installer Zip" file.
- Unzip and run the installation program: "TAPFeedAgentSetup.exe"
- Select the language the Setup will use during the setup.
- Follow the on-screen instructions and accept default settings to complete the setup.
- Enter "E-mail" which is used to log in into your TAP account
- Enter "Password" which is used to log in into your TAP account (if this an update / reinstall scenario, the last step will not be shown).
Mobile FEED app:
- When you select a mixer that requires the FEED app, the system will instruct you to download the FEED app from the Google play or Apple store.
- Install the FEED app on your mobile device. Loads assigned to this mixer will now automatically sync with the FEED app.
Additional functionlity:
- Click to edit or delete a feed mixer.
How did we do with this article?